Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, removed from unused 18” or 24” China Surroundings Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring in the middle of your electric electric motor, capacitor and quickness control switch is still hooked up nevertheless the cord itself is normally detached as observed in the photos. (Find “Control Notice” below for modify type.)
T (See “App Notice” below for make use of in a variety of other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is½” (0.500″) diameter x 2 ½” long with a collection screw soft. There are (4) threaded electric fan motor china mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually have got 4mm threads and also to be on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to the next).
Rate: The approximate engine speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric motor) is Clockwise.
Control Take notice: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). Both of these types of switches both control the engine just as (but you possess a rotating knob and you have a pull-chain). If you order several motor at a time, we will do our best to 
supply your purchase with each one kind of control or the excess.
Application Note: Do NOT use this electric electric motor in a nonfan application. This is a totally enclosed fan electric motor and made to have continuous ventilation over the motor casing for cooling. The casing isn’t vented and the electrical engine will overheat and get into automated thermal overload if run in a nonfan program where there isn’t strong ventilation past the engine. (Caution Note: the electric motor will restart instantly when it cools back off.) Using this electrical motor for applications apart from 18 & 24″ TPI fans may possibly also overload the electric motor and cause it to proceed into automated thermal overload. (Your lover blade from another producer may possess a steeper blade position.)
Origin: This electric motor is manufactured in China.