This standard range of Servo-Worm Reducers are ideal for use in applications that demand high performance, precise positioning and repeatability. They were specifically developed for make use of with state-of-the-art servo engine technology, providing restricted integration of the motor to the unit. Angular backlash of less than 1 arc-minutes is provided standard.
They are available in four sizes (50 mm to 100 mm center distance) with input speeds up to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide variety of electric motor couplings and installation flanges are available for assembly to practically all servo motors, and the hollow bore output can be utilized to mount output shafts, pinion shafts, or other drive elements.
Usual applications for these reducers include precision rotary axis drives, traveling gantries & columns, material handling axis drives, zero-backlash axis drives and electronic line shafting. Industries served include Material Managing, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors possess a torque selection of 92 Nm to 520 Nm. As angular drives they are specially space-saving and decrease the expenditure for valuable set up space.
The helical-worm servo gearmotors were created so that they guarantee you a low-noise system environment. Moreover, these gearmotors offer you superb attenuation properties for the procedure of your systems with low levels of vibration. This is definitely because of the longitudinal program of drive on the input shaft. This enables torque impulses to be prevented effectively and for optimum results in terms of running smoothness and sound reduction to be achieved.
Both the equipment unit, and the synchronous servomotor are based on our modular system. This enables you to have completely individual configuration options for each application. One factor is for certain – Our servo gearmotors are genuine low backlash worm drive specialists for very specific requirements.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right angle gearboxes, speed reducers, worm equipment reducers and worm drive gearboxes. Gear decrease boxes feature a gear arrangement when a equipment in the type of a screw, also referred to as a worm, meshes with a worm equipment. These gears are usually created from bronze and the worms are steel or stainless steel.
While worm gears are similar to a spur equipment, the worm gearboxes are significantly smaller than other gear reduction boxes. A major benefit of worm gear reducers is definitely that they produce an output that is 90° from the insight and can be utilized to transmit higher torque or decrease rotational speed. Most often, a worm gearbox provides right hand threads; to improve the direction of the result, a left-hand thread worm gearbox is 
required.
At times a motor’s capability may be limited to the stage where it needs gearing. As servo manufacturers develop more powerful motors that can muscle mass applications through more complicated moves and create higher torques and speeds, these motors need gearheads equal to the task.