rotary cutter gearbox
Replacement Rotary Cutter gearbox, 40hp rated, one-three/8″-6 spline enter shaft, one.57″ X 12 tapered spline output shaft and 1:one.47 velocity up ratio.
These gearboxes have a sq. housing configuration and are similar in 
mounting and ratio to the round configuration gearboxes.
These are first gear gearboxes
This gearbox will not fit the IM400, IM500 and IM60 types as they have a easy input shaft!
Compare with similar objects
rotary cutter gearbox
Alternative Rotary Cutter gearbox, 40hp rated, 1-3/eight”-six spline input shaft, 1.57″ X twelve tapered spline output shaft and 1:one.47 pace up ratio. These gearboxes have a square housing configuration and are similar in mounting and ratio to the round configuration gearboxes. These are original tools gearboxes on the IM402, IM502 and IM602 sequence rotary cutters which highlighted slip clutch PTO shafts. This gearbox will not match the IM400, IM500 and IM60 versions as they have a clean input shaft! If your gearbox has a 12 spline output shaft and a one-3/eight” – 6 spline input shaft this gearbox will perform. Bolt sample is four-3/4″ on center gap to hole and 6-three/4″ center to centre of bolt gap on diagonal. The mounting holes kind a sq. bolt sample.
rotary cutter gearbox
RC-twenty Sequence
Requirements
Torque: 1,750 – three,267 lb.-in.
198 – 369 Nm.
Ratios: 1:2.5, 1:two.83
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 16 oz. (.forty seven L)
Excess weight: 34 lbs. (fifteen.four kg)
Apps
Ending Mowers Rotary Cutters
Rotary Slashers Toppers
RC-27 Series
RC-30 Sequence
Requirements
Torque: two,800 – 4,667 lb.-in.
316 – 527 Nm.
Ratios: one:1.forty seven, 1:one.seventy one, 1:one.93
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 23 oz. (.68 L)
Excess weight: 51 lbs. (23.1 kg)
Applications
Finishing Mowers Rotary Cutters
Rotary Slashers Toppers
RC-51 Collection
Specs
Torque: two,800 – 4,667 lb.-in.
316 – 527 Nm.
Ratios: 1:1.47, one:1.seventy one, one:1.93
Seals: Triple Lip Spring Loaded
Bearings: Tapered Roller/ Deep Groove Ball
Oil Cap: 27 oz. (.eighty L)
Excess weight: 56 lbs. (twenty five.four kg)
Programs
Rotary Cutters Rotary Slashers
Gears: Accessible with either straight bevel or spiral bevel gearing.
Electricity: Hp & Torque primarily based on AGMA system for continuous obligation plus a services or load class factor.
Shafting: Different dimensional, metallurgical, and heat-deal with choices obtainable.
Bearings: Geardrives obtainable with various bearing lifestyle possibilities.
Lubrication: Drives available with a variety of lubes depending on operating qualities
If this short article didn’t meet your inquisitiveness concerning rotary cutter gearbox, check these additional ones out.