Worm Gear electrical ball screw jack, anti-Rotation and higher pitches available
Translating(traveling screw) and rotating (traveling nut) configurations
Move loads and apply force more effectively than other machine screw actuators
No self-locking! Due to the lack of friction, a holding brake is necessary: a engine brake or a springtime pressure brake is necessary.
These worm gear screw jacks are very precision and reliability, it can meet all of the necessary security, cost-efficiency, and strength mandates of your application. High power bronze worm gear is used, the payloads from 0.5T to 100T . A total of 11 sizes can be found, each in a touring nut version and a simple version.
The screw jacks can be utilized separately or in organizations connected with drive shafts, joints, couplings, bevel gearboxes and additional mechanical components. In addition they can be driven by different motors: electrical, with either AC electric motor or DC motor and also hydraulic or pneumatic motors. All these motion control products can be built-in many type jacking system arrangements or configurations.
Ball screw jacks are normal where higher speeds and duty cycles are needed. Most screw jacks use trapezoidal screws Tr, because they’re basic, robust and inexpensive. The proportion of screw jacks that make use of ball screws is however constantly increasing. The reason why for this are mainly their pitch accuracy, their high efficiency (much less power consumption and much less heat era) and the bigger pitches available, which permit higher stroke speeds.
A screw jack can add a machine cut lifting nut. Because of this model screw jack, just the bronze nut move combined with the screw shaft. The lifting screw does not slide. It can be like the linear actuator worm screw jack working theory which converts rotational motion into linear motion. From this point to understand, an electric linear actuator is usually a motorized screw jack.
The screw thread of screw jack can be acme screw and ball screw. So are there few variations of the screw jack. Commonly, machine screw jack and ball screw jack can be found in your engineer task. Compared with acme screw, the ball screw is definitely better as there are ball bearings between the nut and screw. The anti-friction ball bearing can boost the ball screw efficiency.