• Motor gearboxes are maintenance-free, compact power Greenhouse Gear Motor sources for driving vent, display, home and flap ventilation systems in greenhouses.
• Single phase and three phase choices for your own needs.
• Key feature of the drives certainly are a self-braking worm gear transmission and a built-in linear limit switch device.
shaft-installed gear motors are comprehensive electromechanical drives in which the speed of the installed electrical motor is decreased to the required value using two to four reduction stages. The drives are powerful and durable and feature a concise and lightweight design.
The compact design is made possible through the combination of a spur/worm gear drive with motors optimized for performance. motors also feature a 60 to 70 percent weight-loss compared to commercially available drive motors. This is achieved through the constant application of light weight aluminum die casting technology, which guarantees a high degree of rigidity for the apparatus and motor housing simultaneously.
Each drive is produced and tested specifically for each order and customer. A sophisticated 
modular system permits a great diversity of types and a maximum amount of customization to client requirements.
Thanks to their integrated control models, the shaft-mounted equipment motors will be the ideal drives for applications in reversing mode. In both rotation directions, defined end positions are protected by two placement limit switches. This uncomplicated remedy does not just simplify the cabling, but also can help you configure the end positions quickly and easily. The high shut-off accuracy of the limit switches guarantees safe operation moving forwards and backwards.
This gearmotor integrates a gearbox, a power motor, and limit switches. It is connected with a steel shaft to turn the pinions for greenhouse ventilation. With the support of electric panel, it could run and then stop after set quantity of turns. After that it can open up and close the home windows for greenhouse ventilation to correct positions.
To maintain the delicate environment in the greenhouse, environment control systems certainly are a necessity. Many mechanical systems can be applied in this respect; however cup vent drive systems have a tendency to be the most popular. The drive system contains a central gearmotor linked to a 40:1 right angle reducer with dual result shafts. These OP shafts hook up to lengthy jack shafts that spread over the roof type of the greenhouse linking to multiple rack and pinion mechanisms that open and close large glass windowpane panes in the ceiling for temperature control.
Depending on the size of the application (length of the shafting, amount and weight of the home window panes) we provides two gearmotor solutions from a modified edition of their 200 series parallel shaft line – 1/5 HP and 1/20 HP. The application Is generally intermittent in use; nevertheless the motors are ranked continuous because the glass pane home windows may potentially be under continuous, subtle adjustment during the day.
Gear Motor, also referred to as Engine Gearboxes, is a particular type of electrical motor that is designed to generate high torque whilst maintaining a low horsepower, or low swiftness, motor output. Gear motors are available in many different applications, especially for the greenhouse, livestock and agricultural market, our motors can be found options to operate roof vents, wall structure vents,roof shading and screening, they put on the shaft with chain couplings that compensate for alignment mistakes and can be very easily removed without disturbing the whole shaft.
shaft-installed gear motors are complete electromechanical drives where the speed of the installed electrical motor is decreased to the required value using two to 4 reduction stages. The drives are high performance and durable and feature a concise and lightweight design.