What is pin bush coupling?
Industrial Pin Bush Coupling
The function of a flexible coupling is to transmit torque from on shaft to another where limited mis alignment may occur and to absorb shock loads.
We are one of the prominent institutions engaged in providing Pinbush Coupling which has highly developed rubber compounds for use in bushes to absorb shock, tensional vibrations and small misalignments. These couplings happen to be flexible in type and tend to be of the cushioned travel type that is employed for transmitting the torque through the best tensile steel bolts to the device input. Moreover, these are simple and small in construction that makes these with the capacity of transmitting great torques at optimum speeds. These kinds of couplings generally permit drive in either course and require neither lubrication, nor adjustment after fitting.
Pin and Bush Couplings
lubrication-free
Features
Vertical/horizontal mounting
Adsorbs vibrations
Progressive torsion planting season properties because of primarily pressurised bushings
Fail-safe in case of the failure of the bushings
Convenient replacement of bushings without disassembly of the coupling halves
Free of maintenance, no lubrication necessary
Declaration of conformity relative to ATEX 2014/34/EU possible
Typical applications
Pump drives
Belt drives
Ventilators
General mechanical engineering
Ever-electrical power pin and bush coupling
Ever-power couplings contain a couple of resilient BARREL Shaped bushes with pins & nuts and two flanged hubs of graded cast iron.
The special BARREL shaped bushes let the MISALIGNMENT IN ALL DIRECTIONS and present extra torsional flexibility as compared to plain bushes.
These couplings are suited to standard engineering application requiring reliable power tranny even underneath conditions of shaft misalignments which are generally unavoidable.
Description
Ever-power couplings are being used as flexible compensating couplings in every applications requiring a trusted transmitting of torque under harsh operating conditions. The conical chairs of the buffer pins facilitate mounting and guarantee maintenance-free procedure. The optimized shape of the barrelled buffers enables basic plug-in assembly and low circumferential backlash. A large number of type variants can be found, electronic. g. with brake disk, axial play limiting system, or brake engine couplings.
To the very best of the page
Examples of application
Ever-power couplings are being used generally speaking mechanical engineering both because high-acceleration couplings and for huge torques, e. g. in
Cranes
Conveyors
Blowers
Screw pumps
Cableways
Mixers
Cement processing machines7
To the top of the page
Benefits of the product
Flexible fail-secure pin and bush coupling for moderate up to high torques
Compact style; low weights and mass moments of inertia
Independent of direction of rotation (suitable for reversing operation)
Suitable for plug-in assembly (blind assembly, bell housing installation)
Torque selection of the typical series between 200 Nm and 1,300,000 Nm
May be used in potentially explosive atmospheres; certified acc. to 94/9/EC (ATEX 95)
Pin & Bush Couplings
Simple and practically indestructible, the pin and bush design and style is well suited for applications that involve safety, such as elevator drives or fire pumps. The fail-safe facet of the design enables the coupling to always be serviced at practical intervals, should the elastomer become damaged.
The elastomer elements lessen vibration and dampen impact loads, together with accommodate misalignment up to 0.5 degrees. The original bushing is normally a neoprene elastomer with a graphite impregnated bronze sleeve. These are still available, as well as a contemporary version of this concept: urethane bushings.
Ever-vitality also manufactures many custom variations of the coupling including brake drum and shear pin type couplings.
Damping shaft coupling that works extremely well universally to compensate for shaft misalignment
Nominal torque range between TKN = 19 Nm up to 62,000 Nm with 23 sizes
Temperature range: from -50 °C to +100 °C
Robust and verified a million times
Due to their torsional overall flexibility, Ever-power couplings can move critical torsional vibrations from the operating spot of mechanical equipment in such a way that no unwanted effects on the drive train are to be expected. Ever-electric power couplings are made from high-top quality cast iron. The flexible elements manufactured from synthetic rubber (Buna-N) are available in different examples of hardness for most applications. Steel pins and flexible elements are designed to ensure that no use occurs if they are properly fitted.
Your benefits at a glance
Fail-safe for 
optimum operational reliability
Three-part type suited to plug-in assembly and simplified replacement unit of elements
Choice of elastomer hardness to match various applications
Ideal for use in potentially explosive environments; certified according to
2014/34/EU (ATEX)
High degree of option of parts ex stock
Established as an commercial standard, worldwide in use
Mining and Cement: heating system technology
Oil and Gas: pumps, fans, compressors, atmosphere condensers
Power Generation: pumps, enthusiasts, compressors, air condensers, normal water turbines
Chemicals and Pharmaceuticals: driers, lauter tuns, pumps, followers, compressors, mixers, agitators, reactors
Plastic and Rubber: sole- and double-screw extruders
Pulp and Paper: wastewater purification plants
Water and Wastewater: aerators
Food and Beverage: lauter tuns, reactors, agitators, mixers
Did you know?
Original Ever-power elastomers ensure the optimal operation of your system. The flexible components of the Ever-electric power coupling are subject to compression. If the adaptable elements are irreparably damaged, the hub parts touch metal. This “emergency procedure capability” is required, e.g., in the case of fire pump drives.