The EP Greenhouse gear driver is a compact and lightweight reduction gear reducer with an integrated limit switch system that is ideal for assembly of a locally available electric electric motor. The gear driver is utilized in manually-controlled or climate-controlled ventilation and screen systems in greenhouses. The quick and easy-to-install EP gear motor can be rainproof and windproof. The gear motor has a high protection class (IP65) and can be utilized within an ambient temperature of 0-60 °C.
The low-noise geared motor for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmitting means that the drive shaft is certainly locked when the reduction gear reducer is not running. The completely sealed reduction gear driver has an expansion chamber with a diaphragm to keep carefully the gear essential oil at a minimal pressure under all situations, even at high temperatures. Thanks to the usage of an growth chamber, the gear reducer could be installed in any placement. There are no limitations, since there is no need for a bleed plug. The sealed reduction gear reducer keeps the gear oil of the gearbox in optimum condition because 
of its entire operating life time. The gear reducer is suitable for discontinuous use, operating class s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction gear reducer comes with an FT85 motor assembly flange, on to which the right IEC standard motor can certainly be installed (EN 50347).
The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit change system is installed within an integrated chamber and is usually enclosed by an impact-resistant plastic-type material cover. The limit switch system is accessible and simple to adjust. The limit switch system’s optimum switching range is usually 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The geared motor comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The reducer for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of app of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, maximum activation time 25 mins.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC standard motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).